How do I reset Linksys router to factory settings?

How do I reset Linksys router to factory settings?

1 Factory Reset

1. Ensure the router is ON.
2. Using a paper clip, push and hold the Reset button.
3. Hold the reset switch for 10-15 seconds.
4. Disconnect and reconnect the router’s power adapter.
5. Once it fully reboots, you can use the default username and password to connect the device.

What happens if I reset my Linksys router?

What will happen if I reset the router? Once you reset the router, the settings will be reverted to its factory defaults. All of the customized settings of the router (Wi-Fi name (SSID), wireless security, etc.) will be erased.

What happens if I reset my router to factory settings?

A factory reset, on the other hand, wipes all your data from the router. This includes any passwords, Wi-Fi network details (like your network name (SSID) and passphrase), and any other settings you’ve changed. Essentially, it’s like you just purchased the router from the factory, hence the name.

Should I press the reset button on my router?

So when should you press the Reset button? We suggest only pressing the Reset button if you wish to clear your device of all configurations (intentionally) or if you cannot recover your network password (in the case of routers) and have attempted all other methods of troubleshooting.

How do I get my internet back after resetting my router?

Unplug the router’s power supply. Press in and hold the RESET button. While holding the RESET button, plug in the power supply. When the router has power again, continue to hold the RESET button until the SYSTEM LED begins flashing.

How do you bypass a password on a Linksys router?

To unlock the Linksys router if you don’t know the username and password, you must reset it.

1. Locate the “Reset” button on the back or side of the Linksys router.
2. Insert a straightened paper clip (or any similar object) into the pinhole and hold the “Reset” button for at least 10 seconds to reset the router.

Why is my Wi-Fi not working after reset?

Still No Internet After Modem Reset The usual suspects behind your modem not providing internet access are a broken modem or a bad configuration. Still, it can be a problem with the device you’re using. Maybe your network card doesn’t work. The network adapter configuration might be wrong.

How do I log into my router after reset?

Press and hold the reset button for between 10 and 15 seconds. This will restore the router to its original factory settings and reset the password in the process. Log into your router using the default username and password. In most cases, the default password will be “admin,” “password,” or left blank.

What happens if I push the reset button?

On personal computers, the reset button clears the memory and reboots the machine forcibly. Reset buttons are found on circuit breakers to reset the circuit. This button can cause data corruption which is why it often doesn’t exist on many machines.

How do I reset the Linksys ea6400 to factory defaults?

There are two (2) ways to reset the Linksys EA6400 to factory defaults: 1 Hardware Reset – Press and hold the Reset button on the back panel of the Linksys EA6400 for about 10 seconds then… 2 Software Reset – Log in to your Linksys cloud account. Under Router Settings, click Troubleshooting > Diagnostics. Click… See More….

Does the Linksys ea6400 support remote management?

Yes, the Linksys EA6400 supports Remote Management to other network devices behind the router. For more information, click here. NOTE: The Linksys EA6400 does not support Remote Management to the router’s web-based setup page without using a Linksys cloud account. 17. Where can I find the router’s serial number?

How do I Reset my Linksys router to factory settings?

Resetting the Linksys router to factory defaults If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds.

What is the simpletap™ feature on the Linksys ea6400?

The SimpleTap™ feature is a simplified way to connect your supported Near Field Communication (NFC) mobile phone wirelessly to the Linksys EA6400. The router comes with a SimpleTap™ card. You will need to download the Linksys app, then tap the card to your phone.