Where can I obtain MSDS sheets?

To obtain SDS, get them from the manufacturer.

They may be sent with the chemical order (paper copy or e-mail attachment).
Otherwise, go to the manufacturer’s website and download it or request a copy.

Is hydraulic oil hazardous material?

If hydraulic fluid has more than 0.5% non-dissolved PCB material or more than 50 parts per million total concentration of PCBs, it is considered a hazardous material regulated by the U.S. Environmental Protection Agency (EPA) under the Toxic Substance Control Act (TSCA) and Resource Conservation and Recovery Act (RCRA) …

Are MSDS sheets public?

The public has a right to MSDS data upon request. They must be written in English and contain: the name of the chemical (same as on the label)

Is hydraulic oil DG?

Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea.

How much hydraulic fluid is toxic?

The Occupational Safety and Health Administration (OSHA) has set an exposure limit of 2,000 milligram per cubic meter (mg/m3 ) petroleum distillates for an 8-hour workday, 40-hour workweek.

Does hydraulic oil contain PCBs?

PCBs are ubiquitous and are found frequently, especially in oil drained from electrical equipment (transformers, capacitors, etc.) and old hydraulic systems.

Do MSDS sheets need to be printed?

OSHA mandates that SDS must be provided to employees working with hazardous materials. OSHA does not tell us how to provide SDS to employees, so you can print a book or provide them digitally, as long as the employee has access throughout the workday, and each employee has been provided training on how to access them.

What is AW 46 hydraulic oil?

AW Hydraulic Oil (ISO: 32, 46, 68, 100) AW Hydraulic Oil is premium grade oil designed for use in all hydraulic systems where anti-wear hydraulic oil is recommended. All grades are rust and oxidation inhibited and contain an effective anti-wear additive and anti-foam additives to release entrained air rapidly.

Is AW 46 hydraulic oil flammable?

Flash Point: 405 ºF Minimum COC, 207 ºC NFPA Minimum COC Flash Point Method: Cleveland Open Cup Auto Ignition Temperature: 675 ºF (Estimated) 359 ºC (Estimated) Flammable (Explosive) Limits (% by Lower: Not Applicable Flammability Classification: Not Flammable Fire-Fighting Instructions; This material will burn …