What is high bay lighting?

What is high bay lighting?

High bay lights are used to light up spaces whose ceilings are higher than 20ft from the floor and around 40ft. Also, for these lights to operate efficiently from this height, they need specially engineered reflectors in the case of HPS / MH bulbs and lens angles in the case of LED high bays.

What is area lighting?

Area lighting is a type of lighting used to illuminate specific or large spaces. A good example of area lights is parking lot lights. Area lighting should always be chosen carefully according to your needs. They come in different sizes, designs, and types.

How many lm does it take to light a room?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

What is the difference between low bay and high bay lights?

High Bay / Low Bay are lighting terms used to describe the correct bay lights needed for the appropriate ceiling height. Typically, High Bay Lights apply to any large area with a ceiling height greater than 20 ft. In return, Low Bay Fixtures are used in large rooms with a ceiling height between 12 and 20 feet.

How many high bay lights do I need?

Use 100 watts High Bay lights and space them out every 8-14 feet (8 for high brightness, 14 for adequate). A 6×3 pattern for example is 18 lights for basic lighting, or go 7×3 (or 6×4/8×3 depending on wiring) for 21-24 lights to get a medium brightness level. 8×4 for 32 would be very high brightness.

How far apart are high bay lights?

How far apart should LED high bays be installed?

Installation Height	Normal Brightness	High Brightness
Over 30 feet	25 ft spacing	20 ft spacing
20 to 30 feet	18 ft spacing	16 ft spacing
15 to 20 feet	14 ft spacing	12 ft spacing

What is 3D lighting?

3D lighting is the combination of techniques that are utilized to project light in a 3D environment. The lighting artists responsible for 3D lighting in animation can choose from a range of light sources, techniques, effects, and tools that suit the needs and mood of the scene.

What is flood lightning?

Flood Lighting. December 14, 2020 0. Flood Lighting: Flood Lighting refers to the flooding of large surfaces through powerful projectors where the light sources are concentrated into narrow beams using specific reflectors.

How many m2 are in a lumen?

The current regulations indicate that to illuminate an office, for example, we recommend about 300-400 lumens per square meter of surface. Therefore, if your goal is to illuminate an area used as an office whose surface is 100 square meters, the light potency you will need will be around 30,000-40,000 lumens.