How long does a brother fuser last?
The fuser is a part of laser printers that bonds the toner and paper together using heat and pressure. Fusers need to be replaced every 75,000 – 300,000 pages depending on the printer model.
What is a Brother printer fuser?
The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message ‘Replace Parts Fuser Unit’ will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.
What causes a printer fuser to go bad?
Your fuser may overheat due to the type of paper you use. If you use thick paper for a prolonged printing session overheating is likely to occur. Your printer would have to heat its fuser to a higher temperature to bond the toner to the thick paper.
How do I clear the message fuser error or self diagnostic machine will restart in 15 minutes error?
The error message SELF-DIAGNOSTIC – Will Automatically Restart within 15 minutes appears when the machine is not detecting the proper temperature in the fuser unit. This message may clear after turning the machine off using the power button on the control panel and unplugging the power cord.
How do you reset a fuser?
Reset the Fuser Counter:
- Log in as a System Administrator. See the Related Content for additional information.
- Press the Machine Status button on the Control Panel.
- Select the Tools tab on the Touch Screen.
- Select Troubleshooting.
- Select Resets.
- Select Supply Counter Reset.
- Select Fuser.
- Selection Confirm.
Which coat is coated in fuser roller?
Fuser Roller Materials Only two types of material – silicone rubber and fluoroelastomers – have all the necessary physical properties, and these are commonly used to coat a hollow metal core to produce the fuser roller.
How do I know if I need a new fuser for my printer?
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.