How do I setup my TP Link extender as an Access Point?

How do I setup my TP Link extender as an Access Point?

This Article Applies to:

1. Login to the web management page of the range extender.
2. Click Mode in the top right corner of the page.
3. After rebooting, connect the extender to your modem or wired router via an Ethernet cable.
4. Visit http://tplinkrepeater.net, and log in with the username and password you set for the extender.

Can a TP Link extender be used as an Access Point?

Select Access Point and click Save. The extender will reboot and switch to Access Point mode. 3. After rebooting, connect the extender to your modem or wired router via an Ethernet cable.

How do I access my TP Link wireless Access Point?

Open the web browser and type the IP address of the access point/extender (Default is 192.168. 1.1/192.168. 1.254/192.168. 0.254) into the address bar and then Press Enter.

How do I turn my Range Extender into an Access Point?

If your extender has an Access Point/Extender switch, set the switch to Access Point. Using an Ethernet cable, connect your extender to a LAN port on the back of your router. Plug the extender into an electrical outlet. Wait for the Power LED to light.

What is access point mode on extender?

In Access Point(AP) mode, ASUS repeater device connects to a router through an Ethernet cable to extend the wireless signal coverage to other network clients. Note: In this mode, the firewall, IP sharing and NAT functions are disable by default.

Which is better access point or extender?

An access point has the power to increase the network coverage in its designated area by 100%. A range extender is less effective, offering only about a 50% network coverage increase. Range extenders are a more cost-efficient option for individuals.

How do I connect my tp-link router to my phone?

Connect the router to the Ethernet port on the CompactFlash adapter under the access panel. Connect your iOS or Android device to the network created by the TP-LINK. The network name (called SSID) and wireless password are printed under the battery cover of the TP-LINK.

What is the difference between a WiFi extender and an access point?

Access point is a wireless networking device that allows wireless devices and networks to connect through a wired network using wireless technologies such as Wi-Fi. Extender, sometimes called as repeater, on the other hand, is a networking device used to extend the coverage area of your wireless network.

Should I make my WiFi extender an access point?

Why Access Points Are Better for Businesses While range extenders do increase the coverage of a Wi-Fi router, they do not increase its available bandwidth. Depending on the number of devices you have connected simultaneously, a range extender could end up weighing down your connection.