How do I know my eyelet size?
Eyelet and grommet dimensions are generally measured in thousandths of inches (3 decimal places). Therefore, it is advisable to use precise measurement tools to determine Stimpson part dimensions. We recommend a caliper for all dimensions except I.D. and hole size, which should be measured using pin gauges.
How big are eyelet holes?
Grommet and Eyelet Sizing Chart
Size | Outside Diameter (in millimeters) | Inside Diameter (in millimeters) |
---|---|---|
#1 (5/16″) | 17.5mm | 7mm |
#2 (3/8″) | 19mm | 9mm |
#3 (7/16″) | 22mm | 12mm |
#4 (1/2″) | 28mm | 15mm |
How big are grommet holes?
Grommet Size Chart
Size | ID (inner diameter) | Hole Size |
---|---|---|
#0 | 0.248 | 1/4 |
#1 | 0.287 | 9/32 |
#2 | 0.362 | 3/8 |
#3 | 0.433 | 7/16 |
What is the difference between a grommet and an eyelet?
There are slight differences in the two, an eyelet is comprised of two rings of metal that have small prongs that when applied together with forced, form a strong bond with one another. A grommet is very similar. Grommets are typically used for more heavy duty materials and usually are bigger in size.
What size hole do you drill for a 2 inch grommet?
Helpful Expert Reply: The 2″ Round Grommet # A54GB is designed to be used with a 2-5/16 inch diameter hole.
What size are eyelets on boots?
What size are shoe eyelets?
Number of Eyelets | Lace Length |
---|---|
4 Eyelets | 36 Inches |
5-6 Eyelets | 45 Inches |
6-7 Eyelets | 54 Inches |
7-8 Eyelets | 63 Inches |
Which is stronger eyelet or grommet?
Grommets are much stronger than eyelets and used in situations that call for a more reinforced and longer lasting hold, such as permanent signage and heavy curtains or drapes.
Do eyelets need washers?
What is this? The photo below shows the underside and you can clearly see that the washer has been wrapped by the top part. Sometimes, eyelets are sold as just one piece, with no washer. These are still eyelets, but they’re a cheaper variety, and when put into fabric, they split on the reverse and don’t look great.
What size hole do I drill for a 3/8 grommet?
1-3/4″
Rubber Grommet – 3/8″ Groove Width – Fits 1-3/4″ Holes.