Does drywall come in 4×9 sheets?
x 4 ft. x 9 ft. UltraLight Drywall.
When should you use 5/8 drywall?
5/8-Inch-Thick Drywall These panels are commonly used for ceilings or for walls that require a prescribed fire-resistant rating. When installed on ceilings, 5/8-inch-thick panels are less susceptible to sagging between the joists than 1/2-inch panels.
Why do you use 5/8 drywall on the ceiling?
The reason most builders use 5/8″ sheetrock on the ceiling is that that thickness of sheetrock is much stiffer. Another reason to go with a 5/8″ on the ceiling is that you will greatly reduce the chance of the sheetrock bowing between the ceiling joist, especially if they’re on 24″ centers.
Does 5/8 drywall need garage walls?
If there are habitable rooms above the garage, 5/8″ type X (fire-rated) drywall must be used at the ceiling.
Do they make 9ft drywall?
Are you preparing to install drywall in a building or home with nine foot ceilings? Today most building supply warehouses carry drywall sheets in 54 inch widths. 54 inch widths allow you to stack two sheets and create 108 inches or 9 feet!
Does Lowes carry in drywall?
Lowe’s Has the Drywall Panels You Need.
Is 5/8 drywall required for basement ceilings?
5/8″ drywall is rarely required in single-family residences. It was used historically because ceiling joists are often 24″ on center, and 5/8 resists sag. You can certainly use no-sag 1/2″ if you like.
What is the STC rating of 2 layers of 5/8 drywall?
between 30-34
With two sheets total, of 5/8” drywall utilizing standard insulation we often see STC ratings ranging between 30-34. With two total sheets of ½” drywall (common for residential interior walls) we usually see an STC rating of around 33.
How much does 5/8-inch drywall weigh?
74 pounds
A 4 x 8-foot sheet of standard 5/8-inch thick drywall weighs 74 pounds, and a 23 percent reduction in weight offered by ultralight can be significant.
Do I need fire rated drywall in garage?
A: First, fire-rated systems are only required if the garage shares a wall or a ceiling with the home. If you are doing repairs in the garage you should replace with like materials, but remember it is the wall system that is fire rated not the product itself.
What is the fire rating for 5/8 drywall?
The 5/8-inch, “fire-code” drywall (called Type X) increases a wall’s fire rating to a minimum of 1 hour, from the 30-minute rating for standard ½-inch drywall. And it’s not just thickness that makes the difference. Type X has a denser core and contains glass fibers that keep it from crumbling in the heat.
How much does a 4×8 sheet of drywall weigh?
how much does a 4×8 sheet of drywall weighThe main difference between ultralight and standard drywall is, obviously, the weight. A conventional 1/2-inch thick sheet of drywall measuring 4 x 8 feet weighs around 57 pounds. According to drywall maker USG, a 4 x 8-foot sheet of Sheetrock brand UltraLi
Is type X gypsum board fire rated?
Type X gypsum board is defined by ASTM C1396 and generally requires a fire-resistance rating of not less than one hour for 5⁄8” thick boards or 45 minutes for ½” boards. Type C is an industry phrase to designate enhanced gypsum panels that exceed the requirements for Type X gypsum board in ASTM C1396.
How much sheetrock will I Need?
In the USA, there are panels available in the following sizes: For a drywall panel size of 4’ x 8’, you need about 32 sheets For a drywall panel size of 4’ x 9’, you need about 28 sheets For a drywall panel size of 4’ x 10’, you need about 25 sheets For a drywall panel size of 4’ x 12’, you need about 21 sheets