Are pressure washer nozzles universal?
Nozzles are manufactured specifically for each machine’s volume and pressure. This means that each nozzle size has a different size orifice (or opening). There are a variety of sizes but the most commonly used are between 3.0 to 6.5, sized in .
How do I know what size pressure washer nozzle I need?
Each pressure washer should have a specific nozzle size that comes with it.
- Find the PSI in top column.
- Move down the column until you find the GPM.
- The orifice size will be the number in the left column of the table.
Which nozzle is best for power washing deck?
Typically decks will need anywhere from a 25-degree nozzle (for more stubborn build-up) to 40-degree (for newer decks with less damage or synthetic wood). The higher the degree the less pressure at point of contact.
What are the different color nozzles for pressure washer?
Most pressure washers come with 4 – 5 color-coded nozzles in the box:
- 0-degree (red)
- 15-degree (yellow)
- 25-degree (green)
- 40-degree (white)
- Soap (black)
What is the nozzle size?
The orifice size of the nozzle determines the operating pressure of your machine. As a rule of thumb, the smaller the orifice, the greater the restriction of water flowing through the machine. This causes the pressure to increase. Choosing a nozzle with too large of an orifice will reduce operating pressure.
Which pressure nozzle is strongest?
The red-colored nozzle is the most powerful and often used for concrete cleaning. This should be the least used nozzle of all, but it does have its place in power washing with it’s small, very concentrated stream of water.
Are all pressure washer hose fittings the same?
The fitting at the end of your hose is what needs to match the fitting. For example, A 1/4″ hose simply has a 1/4″ diameter to the hose but may have an M22, 3/8″ threaded, or quick connect fitting at the ends. Therefore the fitting can vary despite the hose diameter.
Does it matter what hose you use for pressure washer?
The diameter of your hose is vital. Opt for a 1/4 in power washer hose when using an electric or gas-powered washer for residential purposes. It is ideal for machines that produce about 2,700 PSI. If you have a washer that can generate 3,400 PSI or more, go for the 5/16 in.
What is the strongest nozzle for pressure washer?
Red Spray Tip
Red Spray Tip (0-Degrees) The red spray tip creates a 0-degree spray pattern and is the most powerful nozzle of them all. You need to be very careful using this tip to make sure you don’t cause any damage to the surface you are cleaning.
Is a turbo nozzle worth it?
Turbo nozzles have been one of the most important accessories developed. These efficient tools provide the power of a zero-degree pattern. The circular motion also adds extra agitation to cleaning tough jobs like caked-on mud. They are designed to provide a 200% cleaning efficiency over a 25-degree flat fan nozzle.