What is the difference between SOT23 and SOT323?
SOT23 and SOT323 are both plastic and surface-mounted packages. SOT23 owns 3 terminals, 1.9mm pitch, 2.9mm x 1.33mm x 1mm body, while SOT323 boasts 3 leads, 1.3mm pitch, 2mm x 1.25mm x 0.95mm body.
What is SOT23 package?
The SOT23-3 package is very popular and a common package for transistors, and is also used for diodes and voltage regulators. Small Outline Transistor (SOT) packages are very small, inexpensive surface-mount plastic-molded packages with leads on their two long sides.
What does SOT23 stand for?
In the beginning of the surface mount era was SOT 23, which had three pins. It was used mainly to replace the very popular TO-18 and TO-92 3 pin leaded transistor packages, the name means Small Outline Transistor.
Is SOT23 the same as SOT23?
Variations exist with 3 to 8 pins. When surface mount components were just beginning to gain popularity, SOT-23 was introduced to replace the well used through-hole 3-pin TO-18 and TO-92 transistor packages, and so the first variant of SOT-23 was the 3 leaded version (SOT-23-3, officially called TO-236AA by JEDEC).
What is a SOIC package?
A small outline integrated circuit (SOIC) is a surface-mounted integrated circuit (IC) package which occupies an area about 30–50% less than an equivalent dual in-line package (DIP), with a typical thickness being 70% less. They are generally available in the same pin-outs as their counterpart DIP ICs.
What is SOT diode?
A small outline transistor (SOT) is a family of small footprint, discrete surface mount transistor commonly used in consumer electronics.
What is SOT in semiconductor?
A small outline transistor (SOT) is a family of small footprint, discrete surface mount transistor commonly used in consumer electronics. The most common SOT are SOT23 variations, also manufacturers offer the nearly identical thin small outline transistor (TSOT) package, where lower height is important.
What is SOIC package?
The SOIC is a surface mount integrated circuit package. The standard form is a flat rectangular body, with leads extending from two sides. The leads are formed in a gull wing shape to allow solid footing during assembly to a PCB. Standard Pb-free lead finish on these packages is Matte Tin plating.
Is SOP and SOIC the same?
Another name of SOP is called SOIC, JEDEC standard are called SOIC in the United States, and JEITA standard one is called SOP in Japan, and the body width of the former one is larger than the latter.
What is the difference between SSOP and TSSOP?
The main difference between TSSOP and SSOP is the width of the pads or pins, the pitch between the two remains . 65 mm the width of the pads varies from .
What is the difference between SOT23-3 and SOT54?
The SOT23-3 package is very popular and a common package for transistors, and is also used for diodes and voltage regulators. SOT54 is an alternate designation for the JEDEC TO-92 package. The SOT89-3 electrically only has three leads (contact/pin).
Size comparison of transistor packages. Two surface-mount packages, SOT23 and SOT223, are shown next to through-hole packages A small outline transistor (SOT) is a family of small footprint, discrete surface mount transistor commonly used in consumer electronics.
What is the difference between The SOT223-4 and SOT223-5 voltage regulators?
The SOT223-4 package is a popular package for voltage regulators. It was introduced by Philips. The SOT223-5 package is a popular package for voltage regulators. The SOT223-8 package is a popular package for bridged quad transistors.
What is the difference between the JEDEC TO-92 and the sot89-3?
SOT54 is an alternate designation for the JEDEC TO-92 package. The SOT89-3 electrically only has three leads (contact/pin). The wide lead (tab) is physically part of the middle lead on the other side of the package.
https://www.youtube.com/watch?v=OXosd6MtCTQ