What is the color code for a trailer plug?

What is the color code for a trailer plug?

Trailer Wiring Has 5-Wires White, Yellow, Green, Yellow/Brown, and Green/Brown On a 4-Way flat trailer wiring harness, white is the ground, brown is running lights, yellow is left turn signal and green is right turn signal. It sounds like your trailer has a wishbone harness.

What is the black wire on a 6 pin trailer plug?

What is the Color Code for 6-Way Trailer Wiring?

  1. Green: Right turn/brake light.
  2. Yellow: Left turn/brake light.
  3. Brown: Tail/running lights.
  4. White: Ground wire.
  5. Blue: Brake controller output.
  6. Red or Black: Battery hot lead.

What is the red wire on a trailer plug?

The red wire is the turn signal wire and will be run to the green wire of your harness if its the right turn signal side, and the black wire will run to the brown wire of your harness.

How do you test a 6-pin trailer plug?

You will need to use a circuit tester, item # PTW2992 if needed, to test the pins in the 6-Way connector at the rear of your vehicle. Ground the alligator clip to the vehicle chassis and touch the test light to the center pin. If the light in the tester lights then the center pin is hot, 12 volts.

What color of wire controls the electrical brakes in trailer wiring?

The system hooks into the electrical system by connecting Auxiliary Power (Red wire +12 VDC) to keep the battery charged, the Brakes (Blue wire) to actuate the brakes, and Ground (White wire) to complete the circuit.

What are the red white and black wires on trailer lights?

It is likely that the red wire on your old lights is the turn signal/brake light wire and the black wire is the running light wire. That would make the white wire the ground. You can verify this by testing the wires using a circuit tester such as # 40376.

What do the colors on trailer lights mean?

5 Core Trailer Wire Colors & Meaning 1) The white color signifies the ground. 2) The brown color means tail lights or possible side markers. 3) The yellow color indicates a left turn signal light. 4) The green color signifies a right turn signal or light. 5) The blue color suggests electric breaks or hydraulic release.

Where does the yellow wire go on a trailer plug?

The yellow wire of the 7-way harness part # H20044 that you referenced goes to the center pin of the 7-way which is an aux circuit that is typically used for reverse lights if present on the trailer.

What is the blue wire on a trailer plug?

It is an auxiliary wire typically used to connect the reverse lights from the tow vehicle to the reverse lockout solenoid located directly behind a surge brake actuator. When properly connected it allows you to disengage the trailer brakes in order to back the trailer up (without getting out of the vehicle).

What color is the 7-way connector on a trailer?

7-way connector: Trailer wiring color code explanation. GREEN – Right Turn Lights/Brakes; YELLOW – Left Turn Lights/Brakes; BROWN – Tail Lights/Running Lights; WHITE – Ground Wire; BLUE – Reverse lights; BLACK – 12V power supply; PURPLE – backup/reverse lights; Truck Trailer Light Wiring: Options & Packages

What is a 6-way plug on a trailer?

A 6-way plug connects your trailer and tow vehicle and provides the required lights, turn signals, brake power, battery hot lead, and ground. Most of us aren’t electricians, but that doesn’t mean wiring a trailer or replacing corroded wiring is beyond us. We’ll walk you through the wiring process–it’s easier than you think!

Do you need a 5 pin connector for a trailer?

Trailers with capacity over 3000# Total Gross Trailer Weight should have brakes. That’s not mandatory everywhere, but it’s a good idea. If a trailer has brakes, then it needs a connector with at least 5 pins. The 5th pin, a blue wire, gives power to operate (or disable) the trailer brakes. Traditional Trailer + with Brakes = Use a 5-Pin Connector.

What are the 6 function trailer wiring?

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and wiring matrix that explains wire color, function, and gauge needed, among other helpful information.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top