What is a Farmall H good for?
It’s a well-designed tractor, without any regular flaws. The Farmall H starts easily and runs smoothly, even in the cold. It’s perfect for the pushing and pulling tasks I tackle every day. I’ve added extra weights and bigger tires to my tractor, and it handles the added weight with more power to spare.
How much is a Farmall H worth?
First things first: this really is an incredible selling price for a Farmall H! There are plenty of Farmall H tractors still around – hundreds of thousands were produced, and here in Michigan you can usually by a Farmall H for as little as $1,000.
How fast does a Farmall H go?
The H has a top speed in road gear lower then 18 mph. The books I’ve seen all said it depended on tire size of course….but between 16 & 16-1/2 MPH. That’s at full load 1650 RPM….and no load, just a tad over 1800 they would run a bit faster.
How many horsepower is a Farmall H?
Would you like to get more horsepower out of your Farmall H? These classic Farmall tractors are rated for 19 horsepower at the drawbar, 24 at the belt.
How many quarts of oil does a Farmall H take?
6 qts
Farmall H Engine
| Engine Detail | |
|---|---|
| International Harvester | |
| Firing order: | 1-3-4-2 |
| Oil capacity: | 6 qts 5.7 L |
| Coolant capacity: | 16.5 qts 15.6 L |
What engine is in a Farmall H?
Farmall H Engine
| Engine Detail | |
|---|---|
| International Harvester C-152 | |
| Displacement: | 152.1 ci 2.5 L |
| Bore/Stroke: | 3.375×4.25 inches 86 x 108 mm |
| Compression: | 5.9:1 |
How much does an H Farmall tractor weigh?
Farmall H
| 1941 Farmall H | |
|---|---|
| Length | 125.25 inches (318.1 cm) |
| Width | 75.7 inches (192 cm) |
| Height | 74 inches (190 cm) to steering wheel) |
| Weight | 2,845 pounds (1,290 kg) |
When did IH buy Farmall?
On November 23, 1984, the deal was finalized. Almost three months later, during February 1985, the transaction was completed. The IH farm equipment division became part of Case IH….
| Company | Profit Margins 1956-1960 |
|---|---|
| Deere & Company: | 7.2% |
| General Motors: | 7.5% |
| Caterpillar: | 6.4% |
How do I get more horsepower from my Farmall H?
You can get more horsepower out of a Farmall 300 or 350 piston and sleeve kit, but it won’t fit in the Farmall H block the same way. You’ll need to either replace the block with one from a 300/350 or you can put in an overbore piston and sleeve kit in your standard H block.
What’s the horsepower of a Farmall H?
Farmall H
| Farmall H Power | |
|---|---|
| Drawbar (claimed): | 19 hp 14.2 kW |
| Belt (claimed): | 24 hp 17.9 kW |
| Drawbar (tested): | 24.17 hp 18.0 kW |
| Belt (tested): | 26.20 hp 19.5 kW |