How much does an OMAX waterjet cost?
When you are attempting to win a grant to supplement the cost of a waterjet, which can start as low as $23,950, be sure to have the exact make and model of the waterjet you want to acquire to ensure you write your funding goals and priorities to be as specific as possible.
How much does a water jet cutter cost?
CNC waterjet machines require an expensive Ultra High Pressure Intensifier pump, so they are going to range from at least $100,000 to as much as $350,000, depending on size and options. Finally, CNC laser machines are usually the most costly.
What type of pump is used by a waterjet cutting machine?
Overview of the Waterjet Cutting Process The water is pressurized using either a hydraulic intensifier pump or a direct-drive pump, also called a crankshaft pump. These pumps are very specialized and are capable of producing extremely high pressures. Some intensifier pumps are rated for pressures as high as 90,000 psi.
Can water jet cut everything?
Materials commonly cut with a water jet include textiles, rubber, foam, plastics, leather, composites, stone, tile, glass, metals, food, paper and much more. “Most ceramics can also be cut on an abrasive water jet as long as the material is softer than the abrasive being used (between 7.5 and 8.5 on the Mohs scale)”.
Can you make money with a waterjet?
When the machine is fully loaded, it is often, but not always, more profitable to make the same parts faster, even at a higher cost. When large quantities of the same part are to be made, it is more profitable to make them with multiple small nozzles rather than one large nozzle.
How much does a water jet cost?
Pricing for small waterjet cutting systems can start around $60k and complete custom systems can reach into the millions. It all depends on your application. You should also factor delivery and disposal costs into your cost for abrasive.
Is waterjet cutting cheaper than laser cutting?
Costs: In terms of laser vs. waterjet cost, laser cutting is a more economical option as it can cut parts faster. Waterjet cutting is comparatively expensive, requiring many components to run properly, including a high-pressure pump, abrasive materials and cutting heads.
How accurate is a water jet cutter?
Relatively speaking, a water jet cutting process is highly accurate. Once the cutting starts (meaning that the initial through hole is complete), a waterjet cutting machine can achieve a parts tolerance of +/- 0.001” with consistency. This makes the waterjet cutting process highly desirable for cutting precision parts.
What pressure is water jet cutting?
between 50,000 and 60,000 PSI
Typical waterjet cutting pressure is between 50,000 and 60,000 PSI. Many newer systems are pressurized up to 90,000 PSI. The water at this pressure is then released through a small orifice machined into a diamond or saphire, usually in the range of 5 to 15 thousandths of an inch diameter.
What does the attenuator do on a waterjet?
The Attenuator acts as a storage/buffering water receptacle providing smooth continuous water pressure to your cutting or cleaning device. It smooths out pulses and protects the HP water components from pressure spikes that occur while cycling your Ultra High Pressure Intensifier Pump.
How deep can water jets cut?
The high-level answer is that abrasive waterjets can cut through 12 inches of most materials. Many users report cutting material even thicker than that. Most abrasive waterjet cutting, however, is done in material that is 3 inches thick or less.
How much PSI is a water jet?
Why choose Jetstream of Houston?
Please try again later. Jetstream of Houston is a leading manufacturer of industrial high-pressure water blasting equipment for a wide range of applications, including industrial cleaning, surface preparation, hydro-demolition, and abrasive waterjet cutting.
Where is water jet located?
Our business is located in Kemah, Texas. Why Water Jet? Work with materials that are affected by heat (such as titanium, and aluminum) or materials that laser can not cut (such as thicker metal or composites) Offer “clean edge” plate work, such as brackets, machine parts and weldments
Why choose our Pump Company in Texas?
As a result, we have grown steadily throughout the years to become the premier pump company in Texas. The business has continuously evolved to provide additional products and services to the commercial, industrial and municipal markets. A complete line of large waste water pumps was added in 1982 as well as a UL listed control panel shop in 1984.
What kind of pump is used at Lake Conroe?
Grundfos/Peerless Vertical Turbine Pumps were installed at Lake Conroe to provide Raw Water intake to a Surface Water Treatment Plant for water distribution in Montgomery County. This project consisted of (3) 48”wide x 30’deep Pump Barrels (2) 18” Discharge Vertical Turbine Pumps.