How do you reset the TPMS on a Honda Insight?
Scroll to the vehicle Settings screen, and select it. Select TPMS Calibration….Models with steering wheel buttons:
- Press MENU.
- Select Customize Settings.
- Select TPMS Calibration.
- Select Initialize.
- Select Yes.
- Press MENU to exit.
How do you fix TPMS malfunction?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual.
What can cause TPMS malfunction?
Most TPMS failures are caused by tire pressure sensors that have reached the end of the road. The batteries inside the tire pressure sensors have a service life that typically ranges from 5 to 7 years.
What does TPMS mean on a Honda Insight?
Tire Pressure Monitoring System
Tire Pressure Monitoring System (TPMS) Monitors the tire pressure while you are driving. If your vehicle’s tire pressure becomes significantly low, or if there is a problem with the TPMS or the compact spare tire*1 is installed, the indicator blinks for about one minute, and then stays on.
Why does my TPMS light keep coming on?
When the TPMS warning light comes ON and stays ON, this indicates a low tire pressure condition in one or more tires. Inflating the tire to the recommended tire pressure found on the door placard should cause the light to turn OFF.
What type of TPMS does Honda use?
Indirect TPMS. The monitoring system in all Hondas uses one of two methods: direct or indirect. All 2012 or older Hondas are equipped with direct monitoring, which uses sensors to continually check tire pressure. Each sensor communicates wirelessly to a control unit in the vehicle.
How do you turn off the tire pressure light on a Honda?
How to Reset Tire Pressure Monitoring System in Newer Honda Vehicles
- From the home screen, select Settings.
- Select Vehicle.
- Select TPMS Calibration.
- Select Calibrate.