# How do you convert aggregate volume to weight?

## How do you convert aggregate volume to weight?

1 cft 20mm coarse ggregate weight in kg And we know that 1 cubic metre is equal to 35.3147 cubic feet, it means 35.3 147 cubic feet of aggregate weight of 20 mm size is equal to 1550 kg, weight of 1 CFT (cubic feet) of 20mm size aggregate is 1550/35.3147= 43.89 kg.

### How do I calculate volume tonnage?

To find out how many Tonnes of a particular product you will need for your project, and to use this guide just multiply the Volume required (Cubic Metres) by the Conversion Rate (Bulk Density). For example, if you needed 3m3 River Pebble 10mm, which has a 1.5 Tonne Bulk Density, you would multiply 3 x 1.5 which = 4.5.

What is the formula for calculating brass?

1brass = 100 cubic ft. 1cubic meter= 35.315 cubic feet. So, 1 brass = 100 / 35.315 = 2.831 cubic meter. 1 cubic meter = 1 / 2.831 = 0.353 brass.

How many cubic meters is a ton of concrete?

One tonne (Metric) of concrete converted to cubic meter equals to 0.42 m3. How many cubic meters of concrete are in 1 tonne (Metric)? The answer is: The change of 1 t ( tonne (Metric) ) unit of concrete measure equals = to 0.42 m3 ( cubic meter ) as the equivalent measure for the same concrete type.

## How much does 1 cubic metre of builders mix weigh?

Aggregates (crushed rock) – 1200 kg In a standard cubic metre of concrete, this amount of crushed rock forms a sturdy framework for the mix, while the size and shape of the aggregates will influence workability.

### How do you calculate aggregate unit weight?

The weight of the aggregate is measured and divided by the volume of the container to yield the dry rodded unit weight in terms of weight per volume such as pounds per cubic foot.

How do you convert volume to pounds?

To convert a liter measurement to a pound measurement, multiply the volume by 2.204623 times the density of the ingredient or material. Thus, the volume in pounds is equal to the liters multiplied by 2.204623 times the density of the ingredient or material.

How do you convert density to mass and volume?

How can I find mass with density and volume?

1. Look up the density of the material the object is made of in kg/m³.
2. Measure the volume of the object in m³.
3. Multiply the density by the volume.
4. You will then have the mass of the object in kg.

## What is the weight of 1m3 of concrete?

2.5 Tonnes
One cubic metre of concrete weighs 2.5 Tonnes. Typically, 1m3 of concrete is made up of 350Kg of cement, 700Kg of sand, 1,200Kg of chippings and 150 Litres of water.

### How do I convert cubic meters to tonnes?

Cubic meters do not naturally convert into tons because the two units measure different properties: cubic meters (m^3) measure volume; tons, also known as U.S. or short tons, measure mass. The two different units can be made equivalent using density, which is a measurement of mass in relation to volume.

How do you convert lb/Bu to kg/hL?

Derived by dividing the determined approximate kg/hLby 1.247. The value 1.247 represents the arithmetic relationship between the lb/British Dry Bushel and kg/hL: 1 British Bushel = 0.3637 hectolitre 1 kg= 1000 grams 1 lb= 453.59 grams kg/hL= 0.45359/0.3637 = 1.247 lb/bu(arithmetic conversion)

What is the difference between kg/hL and LB/lB/British dry bushel?

The value 1.247 represents the arithmetic relationship between the lb/British Dry Bushel and kg/hL: 1 British Bushel = 0.3637 hectolitre 1 kg= 1000 grams

## What is the conversion of G/L to lb/gal?

1 g/l to lb/gal = 0.00835 lb/gal. 10 g/l to lb/gal = 0.08345 lb/gal. 50 g/l to lb/gal = 0.41727 lb/gal. 100 g/l to lb/gal = 0.83454 lb/gal.

### How many HL in 1 L?

How many HL in 1 L? The answer is 0.01. We assume you are converting between hectoliter and liter. The SI derived unit for volume is the cubic meter. Note that rounding errors may occur, so always check the results. Use this page to learn how to convert between hectoliters and liters. Type in your own numbers in the form to convert the units!

Begin typing your search term above and press enter to search. Press ESC to cancel.