How do you clear a DSC alarm trouble code?
Pull down the panel that covers the keypad on your alarm system. After this, simply enter your 4 digit master code, wait 2 seconds, and then enter it again. On some models, this step will reset the alarm and stop it from ringing. This step will also reset the trouble light, armed light, and memory light.
What does the yellow triangle mean on my DSC alarm system?
A yellow triangle on your DSC ADT Alarm system is also known as a “trouble light.” That means if you see this symbol, your system has an issue that you need to resolve. A trouble light could mean 1 of 8 problems. To find out what the problem is, you can simply press *2 on your keypad.
What is DSC master code?
The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system. You can arm and disarm the system and any partition on the system if you are using multiple partitions.
What is the installer code for DSC?
5555
Default Master and Installation codes for DSC systems Depending on the type of system you have, the default installer code will be 5555, 5010, 1550, or 1500. To get into programming you’ll press * 8 then the installer code and then you’ll see a red lock appear letting you know you’re in programming.
Why does my security alarm keep beeping?
Most systems continuously beep to alert you that batteries need to be changed. This is true for both security panels and detectors. Go through your home, and test all batteries associated with your security system using a battery tester.
Why does my DSC alarm keep beeping?
That infernal beeping is likely happening because your alarm panel has detected one or more trouble conditions. Some common beep-inducing issues include low battery indications, battery failure, phone line failure, and communication issues. Before you do anything, make sure that your system is disarmed.
How do I reset DSC alarm to factory defaults?
Power up the panel, wait 10 seconds and power down. Then disconnect the jumper, and power the system back on. Performing a factory default will restore all system settings to their default.
How do I get rid of the yellow triangle on my DSC alarm?
Press the ‘#’ key to silence the beeping, however you will need to fix the problem before the light will go out. You can also press ‘9’ after ‘*2’ to acknowledge and cancel the trouble condition but you still must fix the problem.
How do I reset the yellow triangle on my DSC alarm?
DSC alarms can go off for a number of reasons. To reset the alarm or the warning lights, enter your master code twice, press the reset button, and then enter “*72” if the alarm is still ringing. Once the alarm is off, try to find out why it went off.
How do I find my DSC trouble code?
Your system will generate a trouble code that can be used to decipher the actual trouble condition. Press the ‘*’ followed by the number ‘2’. This will generate a small number in your display window. This number corresponds to the trouble condition on your system.