How do you adjust a Traxxas slipper clutch?
Adjusting the Slipper Clutch Remove the rubber slipper clutch plug on the transmission cover in order to adjust the slipper. Use the 4-way wrench to turn the adjusting nut clockwise to tighten and counter-clockwise to loosen. Place the model on a high traction surface, such as carpet.
How does a slipper clutch work RC?
A slipper style clutch is typically placed on the spur gear that meshes with the pinion gear found on the motor. It utilizes what are known as slipper pads to act as braking material for the clutch. These pads are forced under pressure by an adjustable nut and spring to maintain pressure against the slipper hub.
Do you need a slipper clutch RC?
Running your RC car in extremely loose surfaces will require a more loose slipper setting. Opposite to this, running your RC in extremely grippy surfaces will require a tighter slipper setting.
What does the slipper clutch do on a Traxxas?
Your Traxxas model may be equipped with an adjustable slipper clutch which is built into the large spur gear. The purpose of the slipper clutch is to regulate the amount of power sent to the rear wheels to prevent tire spin.
What is the recommended slipper clutch setting?
The minimum recommended slipper clutch setting is 1/2 turn counter-clockwise from fully compressed. Revo 3.3/T-Maxx 3.3 (These adjust differently than the other vehicles)
Can I run with the slipper clutch adjusting spring fully compressed?
Do not run your model with the slipper clutch adjusting spring fully compressed. The minimum recommended slipper clutch setting is 1/2 turn counter-clockwise from fully compressed. Revo 3.3/T-Maxx 3.3 (These adjust differently than the other vehicles) The slipper clutch is adjusted by loosening the spring-loaded locknut on the slipper shaft.
How do you adjust the slipper clutch on a Revo?
The minimum recommended slipper clutch setting is 1/2 turn counter-clockwise from fully compressed. Revo 3.3/T-Maxx 3.3 (These adjust differently than the other vehicles) The slipper clutch is adjusted by loosening the spring-loaded locknut on the slipper shaft.