How do I set elevation in MicroStation?

How do I set elevation in MicroStation?

Start “Set Element Elevation” tool; set desired elevation. 4. Select elements and accept….Use Element Information (V8i and later).

1. Select element.
2. Start “Element Information” (pulldown, Element > Information).
3. Go to “Geometry” section.
4. Adjust “Elevation” as needed.

Is there draw order in MicroStation?

By default, MicroStation displays the elements on your screen in the order in which they were drawn. If you’re using reference files, the active file will display first followed by the reference files in the order of attachement.

How do you flatten in Microstation?

Steps to Accomplish

1. Optional : Select all the elements that you wish to flatten using Element Selection.
2. From the Ribbon select the ‘Flatten Curve’ tool ( Drawing > Curves > Curve Utilities )
3. In the Tool Settings dialog select the plane required for your elements.

How do you rotate cells in MicroStation?

To use, start by placing the cell at the desired location with a data point. The cell may then be rotated by using a second data point to define the rotation. If the reset button is pressed instead, the cell will be placed at a default rotation equal to the active angle.

How do I set priority in MicroStation?

Set Fill to be behind all, Set Lines to be on top of all. Make sure Level Priority column is turned on in Level Manager. Right Click in Name box to check on Priority.

How do I change reference priority in MicroStation?

Solution

1. Go to File > Reference to open the References dialog box.
2. In the Reference dialog box, go to Settings > Update Sequence to open the Update Sequence dialog box.
3. In the Update Sequence dialog box select the Reference (or active file) and then click the up or down arrow buttons to move the file up or down.

How do I change priority level in MicroStation?

Option Two Select an element (i.e. Single Green Line), select Element Information (ID), look for Priority, Set a priority specifically for that one element. One Green Line is now on top.

How do you send a layer to the back in MicroStation?

When conducting MicroStation V8 user training we cover the Edit > Bring to Front command….MicroStation Tip: Send to Back

1. Select the element(s) to be sent to back.
2. Open the Level Display dialog and turn on all of your levels.
3. Using Power Selector invert mode select every element in your model.

How do you flatten a 3D object?

Use the FLATTEN command to change the Z values of all lines, arcs, and polylines to 0.

1. Turn off or freeze any hatch layers with hatch patterns so they are not included in the selection.
2. Type FLATTEN at the command line.
3. Select all objects and press the Enter key.
4. Type N for No when prompted to remove hidden lines.