How do I pair my Plantronics cs500?

How do I pair my Plantronics cs500?

Start with the base in idle mode, and the headset undocked. Press and hold the subscription button on the base until the power/subscription indicator light flashes. Push the multifunction toggle in the volume (+) position until the headset’s indicator light turns on solid.

How do I use my Plantronics headset cs500xd?

Plug one end of the telephone interface cable to the back of the base and the remaining end into the open handset port on the desk phone. Charge the headset for at least 20 minutes before first use (full charge takes 3 hours).

Does Plantronics C052 have Bluetooth?

Being that the Plantronics C052 isn’t Bluetooth and doesn’t connect with your computer, there’s a simple fix! You can purchase a USB wireless headset if you choose or you can get the accessory below which will connect your C052 (CS510 or CS520) to a computer.

How do I pair my Plantronics CS series?

Voyager Legend CS: How to Pair

1. Tap the Voice Button and say “Pairing Mode”
2. Press and hold the call button until you hear “Pairing” The power LED will turn solid blue once paired.

How do I pair my Plantronics wireless headset with base?

Place the charging base into pairing mode. To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode. Click here for pairing instructions for Plantronics Bluetooth headsets.

How do I connect my Plantronics headset C054 to my laptop?

Press and hold the pairing button for 5-8 seconds on the back of your C054 charging base, then release your finger. You’ll see the white LED light start flashing on the front of the charging base.

How do I pair my Plantronics C052 to my phone?

SETUP FOR PHONE WITH A HEADSET PORT Plug the other end into the back of your C052 charging base. STEP 3 Included with your Plantronics C052 is a phone cord. Plug the big end into the back of your Plantronics C052 charging base and plug the other end into the HEADSET port of your desk phone.

What are the letters on the bottom of Plantronics headset?

The main transmit control is the ABCD switch on the bottom of the charging base. A is the lowest setting, and D is the highest setting. Factory default is B. You can fine tune this setting with the plus (+) and minus (-) buttons on the back of the base.

How do I get my Plantronics headset to work?

Start with your headset powered on. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.