Can you use 75W-90 Synthetic Gear Oil?
Mobil Synthetic Gear Oil 75W-90 is a fully synthetic gear lubricant formulated from synthetic base oils and an advanced additive system. It is designed for use in many railway gearboxes and provides excellent load-carrying capability where extreme pressures and shock loading are expected.
What kind of oil goes in the rear end of a semi truck?
TRP Synthetic Gear Oil
TRP Synthetic Gear Oil is recommended as a rear axle and differential oil in over-the-road and off-road vehicles and is as crucial to the reliability of a heavy-duty vehicle as its engine or transmission lubricant.
What gear oil do semi trucks use?
Typically, semi trucks with low loads use 50 to 75 gear oil. Thanks to their thinner films and improved cooling capabilities, lower viscosity provides better protection for trucks with low loads.
Which gear oil is better 75w90 or 75w140?
A 75W-90 is thinner at higher oil temperatures than a 75w140 Recall what I said, the higher the number after W, the thicker your oil will be in hot weather. In other terms, 75w90 is thinner at high temperatures than 75W140. This indicates that 75w140 will do a better job for your car in hot climates.
What is 75W-90 oil used for?
The 75W-90 gear oil is used under extreme pressure conditions and is recommended for limited-slip differentials and for use in colder climates. Used in heavy duty manual transmissions, final drives and axles, high temperatures will not effect the heavy film left by this oil.
Is 75W-90 the same as SAE 90?
The synthetic gear oil rated at SAE 90 at high temp will be less viscous than a standard SAE 90 dino gear oil, at low temp, hence the “75W” for the 75W-90 synthetic, vs. the plain single number “90” for the plain dino.
What oil do you use for wheel hubs?
Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications.
How much oil does a Rockwell diff hold?
The R-170 series axle requires 43 pints (20.3 litres) of lubricant. With a Rockwell Traction. Equalizer, this same axle requires 40 pints (18.9 litres) of lubricant and 3 pints (1.4 litres) of one of the above additives.
What oil goes in a Eaton Fuller transmission?
Eaton Fuller transmissions are designed so the internal parts operate in a bath of lubricant circulated by the motion of gears and shafts. Thus, all parts will be amply lubricated if these procedures are closely followed: Use Roadranger CD50 or equivalent E500 synthetic per Eaton publication TCMT-0021.
Is 75W-140 synthetic?
Product Description Mobil Delvac Synthetic Gear Oil 75W-140 is a fully synthetic drivetrain lubricant engineered to meet demanding performance requirements including Scania STO 1:0, Scania STO 2:0 A and API GL-5.
What is 75W-140 gear oil used for?
SAE 75W-140, API GL-5 is typically used as service fill rear axle oil for many passenger cars and trucks with high loads or very high horsepower. The higher viscosity base stocks help protect gears by maintaining the oil film in addition to the extreme pressure agents used to reduce metal to metal wear.
What does SAE 75W-90 mean?
SAE 75W90 meaning The value before the “W” (W=winter suitability) indicates the flowability of the oil at cold temperatures. Gear oils with 75W remain flowable up to -40°C. The number “90” refers to the kinematic viscosity of the gear oil at 100 °C. The oil is not viscous. This comprises a range of 13.5 – 18.4 mm²/s.
What kind of gear oil does Valvoline use?
VV975-12PK Gear Oil Would you like to tell us about a lower price? Valvoline SynPower Gear Oil is a superior sulfur-phosphorus extreme pressure gear lubricant formulated with synthetic basestocks and additives to provide excellent performance.
What is synpower gear oil used for?
Valvoline SynPower Gear Oil is a superior sulfur-phosphorus extreme pressure gear lubricant formulated with synthetic basestocks and additives to provide excellent performance. It is designed to provide excellent extreme pressure protection, load carrying capacity, anti-foam performance, corrosion protection, and thermal stability protection.
What is the size of the vv975-12pk oil?
14.13 x 10.75 x 12.38 inches VV975-12PK No VV975-12PK Gear Oil Would you like to tell us about a lower price? Valvoline SynPower Gear Oil is a superior sulfur-phosphorus extreme pressure gear lubricant formulated with synthetic basestocks and additives to provide excellent performance.
How long has Valvoline been in business?
For more than 150 years, Valvoline has been creating products with our hands-on expertise to help car and truck owners achieve maximum performance and a prolonged life for their vehicles. Why do we love what we do?